JIH - T1 NC 90° - HORIZONTAL SAWING MACHINE ( FULL AUTOMATIC )

The 12-foot automatic cutting machine is equipped with chip collector, automatic feeding and automatic cutting. The saw shaft is raised horizontally. The inverter can adjust the saw speed and the RPM. The sawblade advances by the servo to drive the gear rock. The cutting width can be adjusted according to the operation screen. The saw seat is positioned to adopt the roller needle bearing, which is stable and has low friction and smooth running. This design is superior compared to the cylinder and hydraulic system, T1 design can avoid the unsatisfactory operation situation. The feeding can be quickly retracted after sawing and save processing time.

Model	JIH-T1
Cutting Width	3,700 mm
Cutting Length	Max.Length 3700 mm, Min.Length 20 mm
Maximum Depth of Cut(H)	24"Saw blade maximum cutting height of 174 mm (Optional:26" saw blade with maximum cutting height of 200 mm)
Blade Diameter	24"x30 mm bore (opt.26")
Bore Diameter	30 mm
Speed	1000~2800 RPM(by inverter)
Main Sawblade Motor	40 HP(Optional:46 HP)
Saw Carriage Drive Motor	2 kw
Automatic Feed System	Automatic feeding length 3700 mm And automatic feeding fixture:10 seats (Automatic feeding effective stroke 3.7meters)
Automatic Feeding Servo	3.5 kw
Table Area	Chromium coating steel ( with universal ball on it )
Outfeed Roller Table	Universal auxiliary table 1.5m × 4 seat
Working Air Pressure	4-6 kg / cm 2
Table Height From Floor	1,100 mm
Machine Dim. (L x W x H)	7,628 mm x 7,213 mm x 2,300 mm
Packing Dim. (L x W x H)	11,920 mm x 2,290 mm x 2,430 mm
Net / Gross Weight	12,000 kgs/12,650 kgs

Estimate Request

Other Products

NC24LS/NC24LBS NC 90° - HORIZONTAL SAWING MACHINE ( FULL AUTOMATIC )

JIH-NC24L / NC30L / NC36L / NC24LB / NC24LW NC 90° - HORIZONTAL SAWING MACHINE ( FULL AUTOMATIC )

JIH-NC18SM 90° - HORIZONTAL SAWING MACHINE ( FULL AUTOMATIC )